diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 024c28b..ee4b021 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -20,7 +20,7 @@
 SOBJS	+= lowlevel_init.o
 endif
 
-ifneq ($(CONFIG_ARMV7_NONSEC),)
+ifneq ($(CONFIG_ARMV7_NONSEC)$(CONFIG_ARMV7_VIRT),)
 SOBJS	+= nonsec_virt.o
 COBJS	+= virt-v7.o
 endif
diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S
index cbee8f7..358348f 100644
--- a/arch/arm/cpu/armv7/nonsec_virt.S
+++ b/arch/arm/cpu/armv7/nonsec_virt.S
@@ -1,5 +1,5 @@
 /*
- * code for switching cores into non-secure state
+ * code for switching cores into non-secure state and into HYP mode
  *
  * Copyright (c) 2013	Andre Przywara <andre.przywara@linaro.org>
  *
@@ -28,15 +28,16 @@
 #include <asm/armv7.h>
 
 .arch_extension sec
+.arch_extension virt
 
-/* the vector table for secure state */
+/* the vector table for secure state and HYP mode */
 _monitor_vectors:
 	.word 0	/* reset */
 	.word 0 /* undef */
 	adr pc, _secure_monitor
 	.word 0
 	.word 0
-	.word 0
+	adr pc, _hyp_trap
 	.word 0
 	.word 0
 
@@ -53,10 +54,27 @@
 	bic	r1, r1, #0x4e			@ clear IRQ, FIQ, EA, nET bits
 	orr	r1, r1, #0x31			@ enable NS, AW, FW bits
 
+#ifdef CONFIG_ARMV7_VIRT
+	mrc	p15, 0, r0, c0, c1, 1		@ read ID_PFR1
+	and	r0, r0, #CPUID_ARM_VIRT_MASK	@ mask virtualization bits
+	cmp	r0, #(1 << CPUID_ARM_VIRT_SHIFT)
+	orreq	r1, r1, #0x100			@ allow HVC instruction
+#endif
+
 	mcr	p15, 0, r1, c1, c1, 0		@ write SCR (with NS bit set)
 
+#ifdef CONFIG_ARMV7_VIRT
+	mrceq	p15, 0, r0, c12, c0, 1		@ get MVBAR value
+	mcreq	p15, 4, r0, c12, c0, 0		@ write HVBAR
+#endif
+
 	movs	pc, lr				@ return to non-secure SVC
 
+_hyp_trap:
+	mrs	lr, elr_hyp	@ for older asm: .byte 0x00, 0xe3, 0x0e, 0xe1
+	mov pc, lr				@ do no switch modes, but
+						@ return to caller
+
 /*
  * Secondary CPUs start here and call the code for the core specific parts
  * of the non-secure and HYP mode transition. The GIC distributor specific
@@ -71,9 +89,13 @@
 	mcr	p15, 0, r1, c12, c0, 0		@ set VBAR
 
 	bl	_nonsec_init
+	mov	r12, r0				@ save GICC address
+#ifdef CONFIG_ARMV7_VIRT
+	bl	_switch_to_hyp
+#endif
 
-	ldr	r1, [r0, #GICC_IAR]		@ acknowledge IPI
-	str	r1, [r0, #GICC_EOIR]		@ signal end of interrupt
+	ldr	r1, [r12, #GICC_IAR]		@ acknowledge IPI
+	str	r1, [r12, #GICC_EOIR]		@ signal end of interrupt
 
 	adr	r0, _smp_pen			@ do not use this address again
 	b	smp_waitloop			@ wait for IPIs, board specific
@@ -173,3 +195,14 @@
 ENDPROC(smp_waitloop)
 .weak smp_waitloop
 #endif
+
+ENTRY(_switch_to_hyp)
+	mov	r0, lr
+	mov	r1, sp				@ save SVC copy of LR and SP
+	isb
+	hvc #0			 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
+	mov	sp, r1
+	mov	lr, r0				@ restore SVC copy of LR and SP
+
+	bx	lr
+ENDPROC(_switch_to_hyp)
diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
index a0b8742..6de7fe7 100644
--- a/arch/arm/cpu/armv7/virt-v7.c
+++ b/arch/arm/cpu/armv7/virt-v7.c
@@ -3,6 +3,7 @@
  * Andre Przywara, Linaro
  *
  * Routines to transition ARMv7 processors from secure into non-secure state
+ * and from non-secure SVC into HYP mode
  * needed to enable ARMv7 virtualization for current hypervisors
  *
  * See file CREDITS for list of people who contributed to this
@@ -31,6 +32,14 @@
 
 unsigned long gic_dist_addr;
 
+static unsigned int read_cpsr(void)
+{
+	unsigned int reg;
+
+	asm volatile ("mrs %0, cpsr\n" : "=r" (reg));
+	return reg;
+}
+
 static unsigned int read_id_pfr1(void)
 {
 	unsigned int reg;
@@ -90,6 +99,34 @@
 	kick_secondary_cpus_gic(gic_dist_addr);
 }
 
+int armv7_switch_hyp(void)
+{
+	unsigned int reg;
+
+	/* check whether we are in HYP mode already */
+	if ((read_cpsr() & 0x1f) == 0x1a) {
+		debug("CPU already in HYP mode\n");
+		return 0;
+	}
+
+	/* check whether the CPU supports the virtualization extensions */
+	reg = read_id_pfr1();
+	if ((reg & CPUID_ARM_VIRT_MASK) != 1 << CPUID_ARM_VIRT_SHIFT) {
+		printf("HYP mode: Virtualization extensions not implemented.\n");
+		return -1;
+	}
+
+	/* call the HYP switching code on this CPU also */
+	_switch_to_hyp();
+
+	if ((read_cpsr() & 0x1F) != 0x1a) {
+		printf("HYP mode: switch not successful.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 int armv7_switch_nonsec(void)
 {
 	unsigned int reg;
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index 2efd4bc..395444e 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -76,14 +76,16 @@
 void v7_outer_cache_flush_range(u32 start, u32 end);
 void v7_outer_cache_inval_range(u32 start, u32 end);
 
-#ifdef CONFIG_ARMV7_NONSEC
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
 
 int armv7_switch_nonsec(void);
+int armv7_switch_hyp(void);
 
 /* defined in assembly file */
 unsigned int _nonsec_init(void);
 void _smp_pen(void);
-#endif /* CONFIG_ARMV7_NONSEC */
+void _switch_to_hyp(void);
+#endif /* CONFIG_ARMV7_NONSEC || CONFIG_ARMV7_VIRT */
 
 #endif /* ! __ASSEMBLY__ */
 
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index b3a961a..f476a89 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -22,7 +22,7 @@
 #include <asm/bootm.h>
 #include <linux/compiler.h>
 
-#ifdef CONFIG_ARMV7_NONSEC
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
 #include <asm/armv7.h>
 #endif
 
@@ -189,8 +189,13 @@
 {
 #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
 	if (armv7_switch_nonsec() == 0)
+#ifdef CONFIG_ARMV7_VIRT
+		if (armv7_switch_hyp() == 0)
+			debug("entered HYP mode\n");
+#else
 		debug("entered non-secure state\n");
 #endif
+#endif
 }
 
 /* Subcommand: PREP */